View SC9698P_20825.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SC9698P
CD PLAY SOC(COMBINED SC9820 with CLOCK)
DESCRIPTION
SC9698P is a single chip of CD paly controller. This IC have CD play, DTS, TAPE, AUX, volume control, remote control, clock display and alarm functions. This IC include CD digital servo controller, signal processor, digital audio DAC output port, and headphone amplifier. It can drive LCD display directly with the least external components.
FEATURES
* CD player * Compatible with CD/CD-R/CD-RW * Support CD play/pause * Support CD previous/next track * Support CD fast forward/backward * CD single track, all tracks playing display * CD play display in random * CD play with scan * CD and tape synch record function * Radio function * Four frequency bands can be selectable (USA, GEN1/2, JAPAN) * Manual tuner * Automatic tuner * Pre-keep radio stations (FM: 10, AM/MW: 10, LW:5) * Tape function * TAPE display * AUX function * AUX function * Electron volume control * CD/radio/tape/AUX channel switch * Volume control and display * Preset POP, CLASS, ROCK three mode. * Support mute ON/OFF and display. * Support X-BASS swotcher and display. * Support ENCODER-VOLUME control. * Clock function * Clock display * Alarm clock * Snoozer * Sleep
QFP-100-14x20-0.65
ORDERING INFORMATION
Device Package
SC9698P QFP-100-14X20-0.65
APPLICATIONS
* Desk-top CD audio
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 1 of 17
SC9698P
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS (Tamb=25C)
Characteristics Supply Voltage Input Voltage On Pins Operating Temperature Symbol VDD VIN Topr Range -0.5 ~ +5.5 -0.5 ~VDD + 0.5 -20 ~ +75 Unit V V C
ELECTRICAL CHARACTERISTICS (VDD=3.4~5.5V;VSS=0V;Tamb=-10~+60C
Characteristics Supply Voltage Supply Current RFIN Input Signal Reference Voltage Common Mode DC Input Current Of Central Diode 1 Input Current Of Central Diode 2 Input Current Of Central Diode 3 Input Current Of Central Diode 4 Input Current Of Satellite Diode 1 Input Current Of Satellite Diode 2 PA Output Current (Low-Level) PA Output Current(High-Level) Symbol VDD IDD VRFIN VIr Vcom ID1 ID2 ID3 ID4 IR1 IR2 IOL(A) IOH(A) 0 0 0 0 0 0 10 10 5V(CD operating) Condition Min. 4.5 Typ. 5.0 50 1 0.5VDD 2.5 9 9 9 9 4.5 4.5 V A A A A A A mA mA
(To be continued)
Max. 5.5
Unit V mA V
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 2 of 17
SC9698P
(Continued)
Characteristics PB Output Current (Low-Level) PB Output Current(High-Level) PC Output Current (Low-Level) PC Output Current(High-Level) LDON Output Current Low-Level Output Load Resistance DAC Full-Scale DAC Output Voltage RAD Output Current FOC Output Current SLED Output Current MOTO Output Current Low Level Output Voltage High Level Output Voltage Moto Low Level Output Voltage Moto High Level Output Voltage RAD, FOC, SLED, MOTO Output 3-State Leakage Current DAC Total Harmonic Distortion Plus Noise
Symbol IOL(B) IOH(B) IOL(C) IOH(C) ILDON RL VFS IRAD IFOC ISLED IMOTO VOLDRIVE1 VOHDRIVE1 VOLmoto VOHmoto IZODRIVE (THD+N)/S
Condition
Min.
Typ. 10 10 10 10
Max.
Unit mA mA mA mA
0 5 0.9 0 0 0 0 RAD, FOC, SELD RAD, FOC, SELD 0 VDD0.4 0 VDD-1 RAD, FOC, SELD, MOTO -10 60 0 to 19 kHz 19 to 20 kHz 24KHz 25 to 35 KHz 35 to 64 KHz 64 to 68 KHz 68 KHz 69 to 88 KHz 1 25 40 50 31 35 40 0 65 8.4672 1.1 1 1 1 5
2 1.2
mA K V mA mA mA
10 0.4 VDD 1.0 VDD +10 70 0.001 2 -
mA V V V V A dB dB dB dB dB dB dB dB dB MHZ
DA Filter Attenuation
Filter_DA
OSC Frequency
Fsystem
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 3 of 17
SC9698P
PIN CONFIGURATION
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 4 of 17
SC9698P
PIN DESCRIPTION
Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Symbol CROUT PA.7 PA.6 PA.5 PA.4 PA.3/ADIN3 PA.2/ADIN2 PA.1/ADIN1 PA.0/ADIN0 PB.0/INT0 PB.1/INT1 PB.2/BUZZ PB.3 PB.4 PB.5 PB.6 PB.7 PC.0 PC.1 PC.2 PC.3 PC.4 PC.5 PC.6 PC.7 MVSS MVDD MRST MTEST MXI MXO COM0 COM1 COM2 COM3 SEG0 SEG1 SEG2 SEG3 I/O O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I I O O O O O O O O O MCU Ground pin. MCU power supply pin. MCU reset pin. MCU test pin. MCU clock input pin. MCU clock output pin. LCD COM0 port. LCD COM1 port. LCD COM2 port. LCD COM3 port. LCD SEG0 port. LCD SEG1 port. LCD SEG2 port. LCD SEG3 port.
(To be continued)
Descriptions 8.4672MHz crystal output pin.
MCU general purpose I/O ports, and the function is decided by the program.
MCU general purpose I/O ports, and the function is decided by the program.
MCU general purpose I/O ports, and the function is decided by the program.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 5 of 17
SC9698P
(Continued)
Pin no. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
Symbol SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 VSSP VPP Vddo Vsso VREF VOR FILTCR FILTCL VOL Sysclk RAD FOC SLED MOTO SDATAIN SCLKIN WCLKIN SDATAOUT SCLKOUT WCLKOUT VDD GND V2/SLED_SW LDON
I/O O O O O O O O O O O O O O O O -O O O O O I O O O O I I I O O O I O LCD SEG4 port. LCD SEG5 port. LCD SEG6 port. LCD SEG7 port. LCD SEG8 port. LCD SEG9 port. LCD SEG10 port. LCD SEG11 port. LCD SEG12 port. LCD SEG13 port. LCD SEG14 port. LCD SEG15 port. LCD SEG16 port. LCD SEG17 port. LCD SEG18 port. Grand OTP program voltage DAC power supply. DAC ground.
Descriptions
Internal reference voltage output pin, the typical voltage is 0.5VDD. DAC right channel audio output pin. DAC right channel filter capacitor. DAC left channel filter capacitor. DAC left channel audio output pin. DAC system clock input pin. Tracking drive output pin. Focus drive output pin. Sled motor driver output pin. Spindle motor driver output pin. DAC data input pin. DAC bit clock input pin. DAC word clock input pin. CD data output pin. CD bit clock output pin. CD word clock output pin. CD power supply. CD ground, I/O port ground. Sled motor position monitor signal input, with pull-up resistor. Laser on signal output pin, with pull-up resistor.
(To be continued)
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 6 of 17
SC9698P
(Continued)
Pin no. 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Symbol CL16 Vssa1 NC NC Vdda1 B A C D F E VCOM VRH ISLICE HFIN HFREF IREF Vssa2 Vdda2 NC NC CRIN
I/O O I I I I I I I O O I I I I
Descriptions 16.9344M clock output pin. Servo module ADC analog ground. Not connect Not connect Servo module ADC analog power. Central diode current signal input 1 Central diode current signal input 2 Central diode current signal input 3 Central diode current signal input 4 Satellite diode current signal input 1 Satellite diode current signal input 2 DC voltage input pin. ADC reference voltage output. Data slice feed back current output. CD pick up signal input pin. CD pick up signal reference voltage. Reference current output pin. Ground of HF and PLL Power of HF and PLL Not connect Not connect 8.4672MHz crystal input pin.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 7 of 17
SC9698P
FUNCTION DESCRIPTION
1. LCD
True table: COM1(Pin 97) SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 2. JUMPER A/D Value 0.00~0.63V 0.63~1.25V 1.25~1.88V 1.88~2.50V 2.50~3.12V 3.12~3.75V 3.75~4.38V 4.38~5.00V Pickup Mechanism SONY SONY THOMSON THOMSON SANYO SANYO SAMSUNG SAMSUNG KSS-213C KSS-213C TCP-11TK TCP-11TK DA11 DA11 V75 V75 Clock & Timer Enable Disable Enable Disable Enable Disable Disable Enable 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 MUTE AUX TAPE 1f STEREO 3f RANDOM 4f : 5f . 6f MEMORY TUNER CD INTRO 2f X-BASS COM2(Pin 98) .. CLASSIC LW 1e AM 3e 3a 4e 4a 5e 5a 6e 6a FM MW 1a 2e 2a COM3(Pin 99) SYNC REC ROCK TIMER 1d PM 3d 3g 4d 4g 5d 5g 6d 6g KHz REPEAT 1g 2d 2g COM4(Pin 100) REMA IN POP SNOOZE 1c 5 3c 3b 4c 4b 5c 5b 6c 6b MHz SLEEP 1b 2c 2b
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 8 of 17
SC9698P
3. KEYBOARD 1. Fran panel keyboard form: KeyAD1(P3-1:26pin) POWER VOL-UP VOL-DOWN FUNCTIN4(CD, TUNER,TAPE, AUX) FUNCTION4 (CD, TUNER, TAPE) CD TUNER TAPE 2. Remote controller keyboard form: T0 K0 K1 K2 K3 K4 K5 K6 K7 PLAY/PAUSE REPEAT/M-UP SNOOZE POWER 1 5 9 FUNCTION4(CD, TUNER, TAPE, AUX) T1 STOP/BAND INTRO TIMER Presset EQ 2 6 0 FUNCTION4(CD,TUN ER,TAPE) T2 UP/FF RANDOM SLEEP X-BASS 3 7 VOL-UP FUNCTION4(CD, TUNER) T3 DOWN/REW MEMORY/CLOCK ADDJ DISPLAY OVER 4 8 VOL-DOWN MUTE KeyAD2(P3-2:27pin) PLAY/PAUSE STOP/BAND UP/FF DOWN/REW REPEAT/M-UP OP/CL DISPLAY AUX KeyAD3(P3-3:28pin) MUTE INTRO RANDOM MEMORY/CLOCK ADJ SLEEP/TIMER SNOOZE Preset EQ X-BASS (0.00V) (0.63V) (1.25V) (1.88V) (2.50V) (3.13V) (3.75V) (4.38V)
4. RADIO MODE 1. Receive band: AREA GEN2 JAPAN CODE AREA0,1 00 01 BAND FM MW FM AM FM GEN1 10 MW LW USA 11 FM AM FREQUENCY RANCE[Hz] 87.50-108.00M 522-1620K 76.0-90.0M,TV1-3 522-1629K 87.50-108.00M 522-1620K 144-281K 87.5-108.0M 520-1710K STEP[Hz] 50K 9K 100K,1CH 9K 50K 9K 1K 100K 10K FREQ REF[Hz] 50K/3.125K 9K 25K 9K 50K/3.15K 9K 1K 50K/3.125K 10K IF +10.7M/1.3375M +450K -10.7M +450K +10.7M/1.3375M +450K +10.7M/1.3375M +450K
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 9 of 17
SC9698P
2. PLL Pin no. 3 4 5 6 7 8 9 10 11 16 17 18 SC9257 pin descriptions I/O I I I/O O O O O I I I I I SIO clock SIO(data line) FM band out MW band out LW band out Non connection Normal or 1/8 IF input select *1 Area select FM IF 1/16 FM osc select it is disable when area is JAPAN *1 1=1/16 FM osc 0=normal IF 1=1/8 IF A0, 1=00: GEN2, 01:JAPAN, 10:GEN1, 11:USA Open=FM, L=other Open=MW, L=other Open=LW, L=other Descriptions PLL Chip select Note
Pin name PERIOD CLOCK DATA OT1 OT2 OT3 OT4 I/O5 I/O6 I/O9/IFIN2 I/O8/IFIN1 I/O7/SCIN
3. Radio key functions 1 TUNER Press this key enter radio mode. 2 BAND This key used to switch frequency bands: FMAMLW(selectable)FM 3) REW press the key, manual search the radio station press the key continuance, auto search the radio station until find the stations. 4 FF press the key, manual search the radio station press the key continuance, auto search the radio station until find the stations. 5 MEMORY UP Take out the memory status:
6) MEMORY First press the MEMORY key, then press the number directly or select the station by the MEMORY UP key, it is keep in when press the MEMORY key again. 4. Radio display 1) FM BAND
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 10 of 17
SC9698P
2) AM BAND
3) Display the memory status
4) Display saving status
5. Tape mode 1. tape functions 1) TAPE Press the key enter TAPE mode. 2. Display
6. CD mode 1. CD key functions 1) CD press this key enter CD mode. 2) PLAY/PAUSE Play/pause key.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 11 of 17
SC9698P
3) STOP Stop key. 4) RANDOM Play with random (in the RANDOM station, press REW key invalible) 5) REW Press the key: jump to the previous track. Reach the previous track, if the current track is the last one, then reach the first track. Press the key continuance: fast backward Fast backward until release the key, if it is reach the first track, then play the tracks normally. 6) FF Press the key: reach the next track Reach the next track , if the current track is the last one, then reach the first track. Press the key continuance: fast forward Fast forward until the key released, if it is reach the last one, then paly tracks normally. 7) REPEAT
8) PROGRAM Press this key enter program station (in the STOP station) Press the REW/FF key select tracks, the program number increased when memory one track, the maximum tracks is 20. After program, the system begin playing tracks. It will quit program status if on operation at 8 seconds, but the tracks also remained. If press the STOP key in program status, clear all program tracks, and quit the program status. 9) INTRO This key used to switch the scan and play functions. 2. CD display 1) STOP status, display total tracks number and total time
2) PLAY status display
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 12 of 17
SC9698P
3) PAUSE status display
4 REW/FF status display
5) RANDOM status display
6) REPAEAT ALL display (the REPEAT symbol blinking at REPEAT ONE status)
7) Program status display
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 13 of 17
SC9698P
8) Programmable status display
7. Volume mode 1. Volume key description 1) VOLUME+/Volume increment or minishreduce. 2) MUTE Mute ON/OFF control. 3) EQ Switch the pre-set mode
2. volume display 1) VOLUME
8. other function 1. Descriptions 1) CLOCK Press the DISPLAY key until reach the time mode, press the key MEMORY continuance, it enter time setting station, then press the UP/DOWN key adjust the time. 2) SLEEP Press the SLEEP key, it enter sleep station, press the key again, set the sleep time (90~10 minutes). When setting the sleep time, the SLEEP symbol blink in the LCD , and after timer turn on, the SLEEP symbol displayed in the LCD, press the SLEEP key again cancel the timer. 3) TIMER Start by the setting time(alarm). Adjust the time. 4) STAND BY/ON Standby /ON switch
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 14 of 17
SC9698P
2. Display 1) Standby status
2) TAPE
3) TIMER
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 15 of 17
SC9698P
TYPICAL APPLICATION CIRCUIT
IF To MCU
SC9257
FM AM LW ST/MO
FMIN AMIN
AREA SELECT
FM IF SELECT
AM IF SELECT
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 16 of 17
SC9698P
PACKAGE OUTLINE
QFP-100-14x20-0.65 Unit: mm
14.00.2
17.90.4
HANDLING MOS DEVICES:
Electrostatic charges can exist in many things. All of our MOS devices are internally protected against electrostatic discharge but they can be damaged if the following precautions are not taken: * Persons at a work bench should be earthed via a wrist strap. * Equipment cases should be earthed. * All tools used during assembly, including soldering tools and solder baths, must be earthed. * MOS devices should be packed for dispatch in antistatic/conductive containers.
Note: Silan reserves the right to make changes without notice in this specification for the improvement of the design and performance. Silan will supply the best possible product for customers.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
16.30.4
12.35
2008.03.24 Page 17 of 17

▲Up To Search▲

Price & Availability of SC9698P

	To Download SC9698P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .